Copyright © 2015 - Beenext Srl

ARACHNO ACCESSORIES AND KITS

Expand your possibilities

Arachno was designed to be perfectly compatible with all the glassware already available inside your lab. So, what you have to do is just buy one, assemble a parallel workstation using your daily glassware and immediately start enjoying it! For the people that do not want to play “flask searching” around the lab, we dedicate three different “starting kits”. Inside these kits, available with small moneys, you can find all the necessary to assemble of a powerful, although inexpensive, parallel synthesis workstation.

'Just to start' kit (Archno6xSR CLASSIC) This kit was assembled to allow a friendly introduction of the parallel synthesis concept inside your lab. You will able to perform up to six parallel experiments, maintaining the mixtures under stirring and inert atmosphere.

'Just to start' KIT CONTENT (click to enlarge)

 The kit is composed by:

  • no. 1 Arachno6xSR Classic  (4 cm legs, six male 14/24 joint, one female14/24 joint)
  • no. 6 20 mL two necks 14/24 round bottom flasks
  • no. 6 cross shaped stirring teflon bars
  • no. 6 14/24 stoppers
  • no. 6 Clipox  stainless steel clips
  • no. 1 male 14/24 joint (connection to inert atmosphere)
  • no. 1 stainless stain clamp&rod (connection to the stirring plate bar).

The kit is supported in two ArachnoCave boxes, one to recover the Arachno itself, the other for the accessories. A special edition Arachno T-shirt  will be included in the shipping.

'Let´s moving ahead!'- kit (Archno6xLR CLASSIC) This kit is perfect to introduce the parallel synthesis concept inside your lab and allow also daring a little more. As in the “Just to start ” kit, also in this case, you will find all the necessary to perform up to six parallel experiments, maintaining the mixtures under stirring and inert atmosphere. In addition, the presence of an Arachno with longer legs as Arachno6xLR will allow run experiments in hot solvents (bp>100). At the same time, larger flasks (50 mL) with two available necks, will allow the addition of accessories of each specific flasks.

'Let´s moving ahead!' KIT CONTENT (click to enlarge)

The kit is composed by:

  • no. 1 Arachno6xLR Classic  (13 cm legs, six male 14/24 joint, one female14/24 joint).
  • no. 6 50 mL three necks 14/24 round bottom flasks.
  • no. 6 cross shape stirring teflon bars.
  • no. 12 14/24 stoppers.
  • no. 6 Clipox  stainless steel clips.
  • no. 1 male 14/24 joint (connection to inert atmosphere).
  • no. 1 stainless Stain Clamp&Rod (connection to the stirring plate bar).

The kit is supported in two ArachnoCave boxes, one to recover the Arachno itself, the other for the accessories. A special edition Arachno T-shirt  will be included in the shipping.

'Over the top!' - kit (Archno6xSR SCREW) This kit was assembled in order to offer a complete parallel synthesis workstation . Beside allowing a friendly introduction of parallel synthesis concept inside your lab , here every possible experiment can be performed. Up to six mixtures can be stirred, if needed under inert atmosphere. The mixture can be cooled or, due to the presence of two series of dedicated condenser, heated at reflux without any limitation of solvent b.p. The presence of a top level Arachno SCREW  is guarantee of high performances as well as toughness, The kit is supported by SCREW  dedicated flasks (50 mL) where the two other available necks allow the addition of accessories (Thermometer, dropping funnels, …). The kit is composed by:

'Over the top' KIT CONTENT (click to enlarge)

The kit is composed by:

  • no. 1 Arachno6xLR SCREW  (4 cm legs, six male screw 14/24 joint, one female14/24 joint)
  • no. 6 50 mL round bottom flasks, one screw central joint, two female 14/24
  • no. 6 cross shape stirring teflon bars
  • no. 12 14/24 stoppers
  • no. 1 male 14/24 joint (connection to inert atmosphere).
  • n.o 6 air condenser
  • n.o 6 water condenser
  • no. 1 stainless Stain clamp&rod (connection to the stirring plate bar).

The kit is supported in two ArachnoCave boxes, one to recover the Arachno itself, the other for the accessories. A special edition Arachno T-shirt  will be included in the shipping.